Siemens SITRANS F Operating Instructions Manual page 100

Operating
7.1 Local User Interface (LUI)
Three Values
4
3
2
1
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Note
Bargraph
The bargraph limits are defined as the lower and upper alarm values.
Massflow
"Massflow Upper Limit Alarm" (menu item 2.2.1.3) and "Massflow Lower Limit Alarm" (menu
item 2.2.1.6) define the bargraph limit shown with Massflow on operating view
98
5
10
9
Third process value
Second process value
Bar graph
Lower Limit Alarm
Long TAG
View number
First process value
Upper Limit Alarm
Alarm status text
Alarm icon
6
7
8
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
Shows the first process value in relation to its configurable maximum
and minimum limits.
The lower limit of the bar graph is defined by the lower alarm limit of
the selected process value.
Describes the measurement point and is shown in all operation views.
Can be changed via the menu "Long TAG" (3.1.1).
Shows the operation view number (1-6). The number refers to the
view number configured in the menu "Setup" → "Display.
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
The upper limit of the bar graph is defined by the upper alarm limit of
the selected process value.
Describes the alarm class. Only shown if an alarm is active.
Indicates an active alarm. Shows the alarm class, see Alarms and
system messages (Page 139). Only shown if an alarm is active.
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01