Siemens SITRANS F Operating Instructions Manual page 79

Step 1 - Identification
Note
The layout of the dialog boxes shown may vary according to the resolution setting for your
computer monitor.
1. Click on "Read Data from Device" to upload Quick Start parameter settings from the
2. If required, change the language for the local user interface.
3. Click on "Next" to accept the default values. ("Descriptor", "Message", and "Date" fields
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01
device to the PC/PG and ensure PDM is synchronized with the device.
can be left blank.)
Commissioning
6.4 Commissioning with PDM
77