Johnson Controls METASYS User Manual page 74

PREVIOUS
REFRESH
report lockout
RESET
SCHEDULE
sample
SECURE
Setpoint
Shunt Time
UNLATCH
74 Network Terminal User's Manual
An NT screen option that automatically shows the previous layer of
penetration.
An NT screen option that refreshes the screen with any dynamic data.
Prevents reporting of COS objects to assigned I/O devices.
A hardware command given to the Access Controller object that resets
any alarms and silences any alarm horns that may be sounding due to
alarm conditions.
An NT command option that allows you to see, modify, or build
schedules for an object.
Current analog value that ID displayed on the History Summary.
A software command given to the Card Reader object that closes a door,
allowing entry only with a valid access card. The command remains in
effect until it is manually overridden, or overridden by a schedule
application feature.
The point at which the desired value of the control variable is set. A
setpoint can be defined for AI or AOS objects. AI controls only warning
limits. AOS controls both the warning limits and current value (desired
value of the control variable).
The amount of time a access controlled door can be held open before an
alarm is issued.
An NT command option that releases the LATCHED status of an object.
Returns the status to normal only if the alarm condition has cleared.