Johnson Controls METASYS User Manual page 31

Using the HELP
Command
You can display a help screen whenever the HELP command appears:
1. Select HELP.
2. Select the command.
3. Press ENTER. The NT displays a description of that option.
4. Press CONTINUE to return to the object screen.
For help on another option, repeat Steps 1-4.
The option is explained below.
To exit, select CONTINUE, then
press ENTER.
Selecting HOLD allows you to
dynamically display this object at a
regular interval while you are logged off.
An object can be assigned to the
HOLD summary only once.
Only six objects can be assigned
to the HOLD summary.
Hold objects are not selectable
on the HOLD summary.
Figure 12: HOLD Command Help Screen
LOG OFF
HOME
CONTINUE
Holdhelp
Network Terminal User's Manual 31