Johnson Controls METASYS User Manual page 72

light scheduling
LIMITS
LOG OFF
LOG ON
manual override
Multistate object
Network Terminal
(NT)
Network Terminal
Emulator
NORMAL
normalband
72 Network Terminal User's Manual
-
Time programmed control of lighting
An NT command option that allows you to see, modify, or add alarm or
warning limits.
The NT screen option that exits the system and clears the screen.
The NT screen option that displays the Password Entry screen.
Manual function command that takes precedence over application
-
and time programmed control of an object.
An attribute within the CS object of LCPs. The attribute can be set to
five different states using Boolean-like commands.
A portable operator's device used to access object data, change operating
parameters and schedules, and perform overrides at the NCU.
An IBM PC, XT, AT or PS/2 computer, or a Toshiba laptop loaded with
NT Emulation software. The NT Emulator can perform the same
functions as the Network Terminal.
A command for the Access Controller that sends all doors on the network
to their appropriate conditions according to the time, date, and application
feature.
Defines the normal range for the value of an analog input object. It is
-
optional and user defined. The normalband is used to calculate the high
and low warning limits:
high warning limits = setpoint + 1/2 of normalband
low warning limit = setpoint -1/2 of normalband
If a normalband and setpoint are entered, high and low warning limits are
set automatically.
-
related