Johnson Controls METASYS User Manual page 68

attribute
AUTO
BD
BI
BO
bandwidth
binary
Binary Data (BD)
object
COS
Card Reader
Card Reader (CR)
object
68 Network Terminal User's Manual
either operate as standalone devices, or as part of the Metasys Network.
Types of ASCs include the AHU, VAV, UNT, and LCP.
A characteristic or property of an object (e.g., a low limit of an analog
object) that is available to the user.
Abbreviation for automatic mode of operation. An NT command option
that releases the override status and returns control of the object to the
application feature.
See Binary Data object.
Binary Input object.
Binary Output object.
For electronic controllers, the change in the controlled variable that
causes a full change in controller output.
A characteristic or property involving a selection, wave, or state, as either
a binary zero or a one.
An object derived from a binary value that was obtained as the result of a
control process, operator entry, or attribute from another object.
- -
See Change of State.
A device that translates information on an Access Card and sends it, via a
Smart Terminal Interface (STI), to the D600 Controller data base for
verification.
A software object that represents one Smart Terminal Interface/Card
Reader combination in an IAC-600 Access Control System.