Johnson Controls METASYS User Manual page 39

Secure -- lock a door allowing entry with an access card only.
Access -- open a door allowing access without the use of an
access card. The door remains in the Access state until
it has been overridden.
Select an available option,
then press ENTER.
EASTZONE
East Wing Readers
FLR1NE
Floor 1 Northeast
HELP
OPEN
Figure 17: Card Reader Command Screen
To command an Access Controller:
1. Select the object (AC or CR) and press ENTER. The object's
command option screen appears.
2. Select the command, and press ENTER again. The command is
executed.
NORMAL
DISABLE
SECURE ACCESS
HOLD
Network Terminal User's Manual 39
LOG OFF
HOME
REFRESH
PREVIOUS
FIG15