Johnson Controls METASYS User Manual page 49

Scheduling AD
Objects
-
Adding a One Time Schedule
-
To add a one time schedule:
1. Select a system, an object, the SCHEDULE command, ONE
then ADD.
2. Enter a new schedule date and time.
3. Enter the new adjust value, the new command, or the new setpoint.
-
Modifying a One Time Schedule
-
To modify a one time schedule:
1. Select a system, an object, the SCHEDULE command, ONE
then MODIFY.
2. Enter a new schedule date and time.
3. Enter the new adjust value, the new command, or the new setpoint.
Deleting Schedules
To delete a schedule, select a system, an object, the SCHEDULE
command, WEEKLY or ONE
Scheduling a change to an AD object is similar to scheduling other
objects, with one exception: After you select the system, the object, and
the SCHEDULE command, you have to select either ADJUST or
WARNING. You can add only four schedules.
Then, follow the procedure for scheduling other objects, beginning with
the selection of the WEEKLY or ONE
-
TIME, then DELETE.
-
TIME commands.
Network Terminal User's Manual 49
-
TIME,
-
TIME,