Johnson Controls METASYS User Manual page 47

Scheduling ACM,
AI, BO, BD, AOS,
PIDL, or CS
Weekly Schedules
You can set up either a weekly or one-time schedule.
To set up a weekly schedule, select a system, an object (ACM, AI, BO,
BD, AOS, PIDL, CS, or L2), the SCHEDULE command, and the
WEEKLY command.
Now you can ADD or MODIFY a weekly schedule to:
adjust an object (AOS, AD, CS, L2)
command an object (BO, BD)
change a setpoint (ACM, AI, PIDL, CS)
Adding a Weekly Schedule
To add a weekly schedule:
1. Select a system, an object, the SCHEDULE option, WEEKLY, and
ADD, then one of the following commands: CUSTOM, HOLIDAY,
EVERY DAY, WEEK DAYS, WEEKENDS, or ALL WEEK.
2. For a CUSTOM schedule, select the days (Sunday, Monday, etc.) for
the schedule. For a HOLIDAY, EVERY DAY, WEEK DAYS,
WEEKENDS, or ALL WEEK schedule, select a day type (Regular,
Alternate, or Both) for the schedule.
3. Enter a new schedule time.
4. Enter the new adjust value (AOS, AD, CS, L2), the new command
(BO, BD), or the new setpoint (PIDL, CS, ACM AI), based on the
object type.
Network Terminal User's Manual 47