Johnson Controls METASYS User Manual page 48

One-Time
Schedules
48 Network Terminal User's Manual
Modifying a Weekly Schedule
To modify a weekly schedule:
1. Select a system, an object, the SCHEDULE command, WEEKLY,
then MODIFY.
2. If you're modifying a CUSTOM schedule, select the days (Sunday,
Monday, etc.) for the schedule.
3. Enter a new schedule time.
4. Enter the new adjust value, the new command, or the new setpoint,
based on the object type.
-
A one time schedule:
overrules any other schedule setup
operates just once, then is deleted
can only be set up for one day
must be set up at least one day before it is supposed to operate
-
To set up a one time schedule, select a system, an object, the
SCHEDULE command, and the ONE
Now you can ADD or MODIFY a one
adjust an object (AOS, AD, CS, L2)
command an object (BO, BD)
change a setpoint (ACM, AI, PIDL, CS)
-
TIME command.
-
time schedule to: