Install Outside Trim; Install Inside Adapter Plate Assembly - Assa Abloy Corbin Russwin ML2000 Series Installation Instructions Manual

BLSS Trim
ML2000 Series
Installation Instructions
6 Installation (cont .)
c

Install Outside Trim

LHR Outside Shown
d

Install Inside Adapter Plate Assembly

1. Install inside adapter plate assembly using two (2) machine screws. (Figure 23)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Make sure spindle seats into clutch adapter then proceed
to Step 6d in order to retain Outside Trim to door.
Figure 22
LHR Inside
Shown
814F798
Machine Screws #8-32x5/8
Figure 23
Inside Adapter Plate Assembly
8
FM351 08/19