Dish: Lnb Installation; Directv: Lnb Installation - KING PHOENIX KPD1000 Owner's Manual

DISH:
LNB INSTALLATION
1 . Fasten (2) stow brackets to arm brackets
with (2) screws on each side .
Stow Bracket
2 . Capture crossbar with attached LNB and
fasten with (1) screw on each side .
Arm
Bracket
#3 Phillips
#3 Phillips
DIRECTV:
1 . Remove and save (2) inner screws from
LNB bracket .
2 . Loosen, but do not remove, (2) outer
screws on LNB bracket .
3 . Slide (2) brackets into position and fasten
to arm with (2) screws .
2
1
Remove and save Remove and save
(2) inner screws (2) inner screws
Loosen (2) outer screws Loosen (2) outer screws
4 . Insert LNB into bracket .
5 . Replace (2) inner screws thru the LNB .
Tighten all (4) screws .
4
Insert LNB Insert LNB
5
Replace (2) inner screws Replace (2) inner screws
Tighten (4) screws Tighten (4) screws
LNB INSTALLATION
Slide (2) brackets Slide (2) brackets
into position into position
3
3
Fasten (2) brackets Fasten (2) brackets
with supplied screws with supplied screws
(#3 Phillips) (#3 Phillips)
KC1417 KC1417
KC1418 KC1418
Page 5