KING PHOENIX KPD1000 Owner's Manual page 14

The DISH DPH LNB will work with all of the DISH Hopper receivers, DISH Wally receivers and
110 VAC 110 VAC
12 VDC 12 VDC
CONTROL CABLE CONNECTION CONTROL CABLE CONNECTION
KC1393 KC1393
!
Page 14
DISH HOPPER-3
To REC To REC
To ODU To ODU
To Host To Host
Double check all electrical and coax connections BEFORE connecting
satellite receiver and applying power.
The control cable has 12 wires that control motors and provide information
and sensor feedback. If the control cable is mis-wired it can cause damage
to the GPS and sensors, which may result in component failure.
Most problems are the result of incorrect connections or configurations.
ViP211 receivers .
Connect to the DPH Connect to the DPH
LNB port 1 LNB port 1
To LNB To LNB
Hybrid Solo Hub Hybrid Solo Hub
Joey may be wired Joey may be wired
or wireless or wireless
Joey 2.0 Joey 2.0
Joey 2.0 Joey 2.0
Hopper 3 Hopper 3