Moving The Dish Manually - KING PHOENIX KPD1000 Owner's Manual

!
After unplugging the control cable from the controller, you can move the dish manually by touching
the following sets of wires from the control cable directly to a 12 volt DC source . To reverse
directions, reverse the wires to the 12 volt DC source .
Skew: YELLOW & GREEN: tilts the dish to the right and left .
Elevation: RED & ORANGE: raises and lowers the dish .
Azimuth: BLACK & BROWN: rotates the dish clockwise and counter clockwise .

MOVING THE DISH MANUALLY

Unplug the control cable from the controller before proceeding.
6 6 Green Green
5 5 Yellow Yellow
4 4 Orange Orange
3 3 Red Red
2 2 Brown Brown
1 1 Black Black
KC1420 KC1420
Motor Motor
Motor Motor
Motor Motor
Motor Motor
Motor Motor
Motor Motor
+ Skew + Skew
- Skew - Skew
+ Elevation + Elevation
- Elevation - Elevation
+ Azimuth + Azimuth
- Azimuth - Azimuth
Page 19