Advertisement
TIP
Record KING Falcon serial
number (located on back
of base) on inside of cover
before installing on roof.
Read through the installation instructions before beginning. Determine the
desired locations for the components using the information on these two pages.
Locations will depend on such things as roof obstructions, cable runs between
components, AC power availability and whether you will install the wall plates.
EXTERIOR
• For best performance, the antenna should be placed as far away from other rooftop objects (TV
antennas, AC units, etc.) and with the best all around line of sight.
• The antenna should be mounted with the coax port towards the rear of the vehicle.
• There must be adequate space for the antenna head to rotate freely. The antenna should not
rotate over other objects or rotate over the edge of the roof.
INTERIOR
• Do not locate interior components in a slide-out.
• Ensure supplied cables reach between components when placed in their installation locations.
• Ensure power inserter and KING WiFiMax router are located where their power supplies can be
plugged into a 110 VAC outlet.
• The KING WiFiMax can be positioned on a stable surface or mounted to a wall.
Page 22
INSTALLATION
CONTENTS
• KING Falcon antenna
• Power inserter with power supply
• Long exterior SMB cable
• Short interior RP-SMA cable
• White wall plate
• Black wall plate
• Installation and operating instructions
• KING WiFiMax router with power supply
IMPORTANT!
Appropriate fasteners and
roof-compatible sealant to be
determined and supplied by installer.
24" Dia.
Hide quick links:
Advertisement
