Graco HFR Setup page 99

Screen 1
This screen enables the user to set the IP address,
DHCP settings, subnet mask, gateway, and DNS
information. See F . 35.
IG
F . 35 EitherNet/IP Fieldbus Screen 1
IG
Screen 2
This screen displays the hardware revision, system
serial number, and data map identification information.
See F . 36.
IG
F . 36 EitherNet FieldBus Screen 2
IG
DeviceNet FieldBus Screen
These screens show only if you have a DeviceNet
FieldBus CGM installed.
3A2797ZAA
Appendix G - Communications Gateway Module Installation Kit
This screen enables the user to set the device address,
and baud rate, and to view the hardware revision,
system serial number, and data map identification
information. See F . 37.
IG
F . 37 DeviceNet FieldBus Screen
IG
PROFIBUS FieldBus Screen
These screens shown only if you have a PROFIBUS
FieldBus CGM installed.
Screen 1
This screen enables the user to set the IP address,
DCHP settings, subnet mask, gateway, and DNS
information. See F . 38.
IG
F . 38 PROFIBUS FieldBus Screen 1
IG
99