Graco HFR Setup page 40

Setup
17.
Install GX-16 Orifices
a. Close both A side (Red) and B side (Blue) feed
inlet valves on the system. See F
14.
b. Close A side (Red) material return ball valves on
the material tank stand.
c. Follow Pressure Relief Procedure on page 43.
d. Remove plugs from GX-16.
e. Install orifices provided.
Orifice
(A) Side
F . 23: GX-16 Plug Location
IG
40
18.
See hose manual. Pressure check for leaks. If no leaks,
wrap hose and electrical connections to protect from
damage.
19.
. 2 on page
IG
Hydraulic reservoir is filled at the factory. Check fluid
level before operating the first time, and weekly thereaf-
ter. See Technical Data on page 117 for specifications.
ti17747a
Pressure check hose
Check hydraulic fluid level
3A2797ZAA