Graco HFR Setup page 73

Home Screen, Night Mode
In Night Mode, the system will cycle on and off
periodically or turn on at a preset time. Entering night
mode will turn pumps and all conditioning zones off.
The circulation on/off cycle begins automatically upon
entering Night Mode. See Conditioning Screen 3 on
page 64.
Status Screen
The status screen provides all of the operational func-
tionality of the Home screen except for operating mode
selection. Refer to the Home screen and operating
mode descriptions for information on this functionality.
In addition to the functionality provided by the Home
screen, the Status screen also provides material condi-
tioning information and control.
3A2797ZAA
Appendix C - ADM Run Screens Overview
Status Screen, Conditioning Control
This screen allows users to turn on and off heat zones
individually or all at once. When a zone is on it is
actively controlling temperature. Refer to the table
below for color code definitions.
Zone
Setting Color
Black
OFF
Grey
Yellow
ON
Green
To turn a single zone on/off:
1. Press to enter the Conditioning Control screen.
2. Use the arrows keys to navigate to the desired
zone.
3. Press to turn on the selected zone. When a
zone is on, the button will be selected. Press the
button again to turn off the zone.
To turn on/off all zones:
1. Press to enter the Conditioning Control screen.
2. Press the to turn on all zones. When one or
more zones are on, the button will be selected.
Press the button again to turn off all zones.
All zones shown for reference. Only four zones may
be active at one time.
Definition
Dispense Disabled
Dispense Allowed
Dispense Disabled
Dispense Allowed
73