Gds3710 Wiring Connection; Powering And Connecting The Gds3710; Power And Data Pins; Figure 1: Connection Example - Grandstream Networks GDS3710 Connection Manual

GDS3710 WIRING CONNECTION

The first step to setup the GDS3710 in an environment is to choose the powering method then and connect
an RJ45 cable so it can interact with the network and start operating. Two ways are possible to power the
GDS3710 using PoE or PSU:
Using PoE as power supply (Suggested)

Connect the other end of the RJ45 cable to the PoE switch.

PoE injector can be used if PoE switch is not available.
Using the Power Adapter as power supply (PSU not provided)

Connect the other end of the RJ45 cable to network switch or router.

Connect DC 12V power source via related cable to the corrected PIN of the GDS3710.

Powering and Connecting the GDS3710

Below Figures provide description of wiring connection of the GDS3710 Back Cover in order to connect the
GDS3710 with RJ45 cable and PSU and Alarm for door systems.

Power and Data PINs

In order to power the GDS3710 using PoE, please follow steps below:
1- Cut into the plastic sheath of your RJ45 cable, then unwind and pair the colors like shown below.
2- Connect each color of the RJ45 to its associate on the Back Cover of the GDS3710.

Figure 1: Connection Example

GDS3710 Input/output Connection Guide
P a g e | 5