Scaleo medical HORIZON P5 User Manual page 35

3. Cleaning and replacing the filter
The particle filter should be cleaned by the patient on a weekly basis to ensure easy airflow. The
particle filter is located on the front of the Horizon® P5, behind the oval center section. The particle
filter cover opens and closes with an intuitive clip system.
1. Using your fingers, remove the center oval (the cover).
2. Clean the particle
It may be necessary to clean the particulate filter more
often in dusty environments. If the filter needs to be
replaced, contact your service provider.
4. Output Filter
The outlet filter is designed to protect the user from inhaling small particles
in the product gas stream. The Horizon® P5 includes an outlet filter
conveniently located behind the removable cannula nozzle fitting. The
Horizon® P5 requires that this filter be replaced between patients or every
3 months if the concentrator is used by the same patient. This output filter
cannot be disinfected and must be replaced.
The output filter can be replaced by the patient using the tool wrench.
The Horizon® P5 concentrator should be cleaned according to the above instructions if used
by a single patient. No special maintenance should be performed by the patient. Any
service other than that specified in this user manual should be performed by technicians
trained and certified by the manufacturer.
DOMU722_v7_EN_20221006_Horizon® P5 User manual
filters with a brush.
Particle
filter
Cover
35