Scaleo medical HORIZON P5 User Manual page 31

Message
Malfunctioning
pneumatic valves
Tank pressure
too high
Charge battery
immediately
Battery TOO
HOT System
shutdown
HOT System
System COLD
System error
Oxygen error
DOMU722_v7_EN_20221006_Horizon® P5 User manual
Condition / Action / Explanation
Defective or out of order Solenoid valves. Contact your service provider.
The pressure is above 32 PSI because of the sieves, but the compressor
is not overspeeding. If the situation persists for 30 seconds, shut down
the equipment and contact your service provider.
Battery level is below 2%. Charge the battery immediately by connecting
the device to an external power source.
The battery temperature is above 45°C and the equipment has stopped
producing oxygen. Turn off the equipment and allow it to cool. Move the
concentrator to a cooler location. Then turn the power back on. Make
sure the unit is well ventilated and that the particle filters are clean. If
the situation persists, switch to a backup oxygen source and contact your
service provider.
The concentrator temperature has been above 55°C for more than 30
seconds. Turn off the unit and allow it to cool. Move the concentrator to
a cooler location. Do not turn on the concentrator until the temperature
has dropped below the critical values. If the temperature does not drop,
contact your service provider.
The concentrator temperature has been below 0°C for more than 30
seconds. Move the device to a warmer location. Do not start the
concentrator until the temperature has risen above the critical values. If
the condition persists, switch to a backup oxygen source and contact
your service provider.
The concentrator has stopped producing oxygen and is shutting down.
Please contact your service provider.
The oxygen concentration is below 60%. The oxygen concentrator stops
after 10 minutes if the compressor cannot compensate in terms of
volume and stops the alarm. If this happens, use your backup source and
contact your service provider.
31