Scaleo medical HORIZON P5 User Manual page 15

•
Power cable and power supply. The Horizon® P5 concentrator is powered by an alternating
current (AC) source. The Horizon® P5 AC power supply provides the current and voltage
required to safely power the Horizon® P5. It is designed to operate from a variety of AC power
sources, automatically adjusting to input voltages from 100V to 240V (50-60Hz), allowing it to
be used with most power sources in the world.
The AC power supply charges the Horizon® P5's batteries when used with AC input power.
Do not use power supplies or power cables other
than those specified in this user manual. The use
of unspecified power supplies or cables may
present a safety hazard and/or adversely affect
the performance of the device.
Do not wrap cords around the power source for
storage. Doing so may damage the cords and
prevent power from being supplied to the
concentrator. To avoid choking or strangulation,
keep cords and tubes out of the reach of children
and pets.
Optional features
•
External battery charger ( R41 10 016 ). The external charger allows you to charge the battery
without going through the concentrator.
1. Connect the external charger by sliding it onto the
battery.
2. Connect the power cord to the external charger.
3. Check the indicator light on the external charger.
4. Fully charge the battery by pressing the test button on
the battery.
DOMU722_v7_EN_20221006_Horizon® P5 User manual
DC output to
the Horizon® P5
AC power plug
Power
Supply
15