Using The Local Operator Interface (Loi); Display Orientation - Emerson Rosemount OCX8800A Manual

Manual
00809-0500-4880
4 Using the local operator interface
(LOI)
This section describes the installation and operation of the LOI module in the
Rosemount OCX8800.
4.1

Display orientation

The local operator interface (LOI) module mounts to a connector on the LOI
board.
The board is installed on the end of the electronics stack in the electronics
housing,
module that allow the LOI to be oriented as desired.
Figure 4-1: LOI components mounting
A. Electronics housing (cover removed)
B. Electronics stack
C. LOI connector
D. LOI board
E. LOI module
Rosemount OCX8800A
Figure 4-1. There are four mating connectors on the back of the LOI

Using the local operator interface (LOI)

December 2022
69