Table of Contents
Advertisement
Manual
00809-0500-4880
2. Verify that the Password jumper is set to the Off position. If the jumper is in
3. Check the position of the failsafe Dip switches. Position the Dip switches as
4. Check the position of the source current Dip switches. Position the Dip
5. Reinstall the SPA access cover.
Rosemount OCX8800A
Figure C-3: SPA Jumper and Dip Switch Settings
A. Access cover
B. SPA - bottom view
C. Source current Dip switches (shown in correct position)
D. Password jumper pins
E. Password on
F. Password off
G. Failsafe Dip switches (shown in correct position)
the On position, reposition the jumper.
shown in
Figure
C-3.
switches as shown in
Figure
C-3.
SPA with HART
alarm
®
December 2022
321
Advertisement
Table of Contents
