Table of Contents
Advertisement
Field Communicator
December 2022
Figure 7-1: Field Communicator Connections - HART
A. Loop connectors
B. Field Communicator
C. Lead set
D. 4-20 mA terminal block in electronics housing
E. O
F. Analog output device
G. Field Communicator rear panel
7.2.2
Connecting to a F
Connect the Field Communicator with the supplied lead set in parallel with the
device to a Fieldbus segment,
connections are polarity sensitive; an error message displays if the device is
connected incorrectly.
WARNING
EXPLOSION
Explosions can result in death or serious injury.
Do not make connections to the Field Communicator's serial port, digital signal
line, or NiCad recharger jack in an explosive atmosphere.
106
4-20 mA signal line
2
OUNDATION
Fieldbus segment
™
Figure
7-2. The Field Communicator Fieldbus
Manual
00809-0500-4880
Emerson.com/Rosemount
Advertisement
Table of Contents
