Emerson Rosemount OCX8800A Manual page 16

Description and specifications
December 2022
1.2.6 Handling the transmitter
CAUTION
Equipment damage
The Rosemount OCX8800 is designed for industrial applications. The probe may
contain components made from ceramics, which are susceptible to shock when
mishandled.
Treat each component of the system with care to avoid physical damage.
Only handle printed circuit boards and integrated circuits when adequate anti-
static precautions have been taken to prevent possible equipment damage.
1.2.7 System considerations
Prior to installing your transmitter, make sure you have all the components
necessary to make the system installation. Ensure that all components are
properly integrated to make the system functional.
After verifying that you have all the components, select mounting locations and
determine how each component will be placed in terms of available line voltage,
ambient temperatures, environmental considerations, convenience and
serviceability.
electronics.
electronics.
support.
Figure 1-7
the optional panel mounted blowback.
A source of instrument air is required at the transmitter for reference air, dilution
air, and eductor air. As the transmitter is equipped with an in-place calibration
feature, make provisions for connecting test gas tanks to the transmitter when
calibrating it.
Note
The electronics module is designed to meet Type 4X and IP66, and the electronic
components are rated to temperatures up to 185 °F (85 °C).
Retain packaging in which the transmitter arrived from the factory in case any
components are to be shipped to another site. This packaging haws been
designed to protect the product.
16
Figure 1-4 shows a typical system wiring for a system with integral
Figure 1-5 shows a typical system wiring for a system with remote
Figure 1-6 shows the dimensions for the optional sample tube
shows the dimensions for the optional in-situ filters.
Manual
00809-0500-4880
Figure 1-8 shows
Emerson.com/Rosemount