Eaton Cutler-Hammer FP 5000 Instruction Leaflet page 75

IL17569C
Page 5-20 Effective Date: 12/05
Table 5.5 Contact Input Configuration Settings
Contact Input Configuration Settings: Phase time overcurrent (51P) and instantaneous (50P-1 & 50P-2) device settings
Display Setting Description
Contact input Contact Input
CFG Configuration Settings
Cin1: Select Cin1 configuration
Cin2: Select Cin2 configuration
Cin3: Select Cin3 configuration
Cin4: Select Cin4 configuration
Cin5: Select Cin5 configuration
Cin6: Select Cin6 configuration
Cin7: Select Cin7 configuration
Cin8: Select Cin8 configuration
Note: The I/O Configuration Setting in the System Configuration settings menu must be set to "custom" for these
set points to be configured. Otherwise the default settings displayed are used. See sections 5.4.5 and 5.4.6 for
details.
Page 5-20
FP-5000
Setpoint Range/
Value Selection
user defined, 52a, 52b,
BFI, Bkr Trouble,
Remote Open,
Remote Close,
Remote Reset,
Datalog Trigger,
Demand Sync,
Sync Bypass,
Sync Block,
Select Set 1,
Select Set 2
For more information visit: www.eatonelectrical.com
Default Selected Refer to
Setting Value Sec. #
5.5.5
9.1
52a
52b
BFI
Bkr Trouble
Remote
Open
Remote
Close
Remote
Reset
user
defined
Effective Date: 12/05