Eaton Cutler-Hammer FP 5000 Instruction Leaflet page 12

I. Power and current demand
J. Min/max values
K. Energy
• Control power
A. ac or dc control power (100–120 Vac, 50/60 Hz or 48–
125 Vdc)
B. ac or dc control power (100-250 vdc or 100-240 ac,
50/60 Hz)
C. Consult factory for availability of other voltage power
supplies.
• Nonvolatile memory for Settings, Waveforms, Sequence of Event
Logs, Trip Logs and Trending
• Determine condition of acquired data relative to settings
A. Current, voltage and frequency protection
• Monitoring and reporting of additional system information
A. Oscillography
B. Sequence of events recording
C. Trip target data
D. Real-time clock
E. Breaker wear, trip coil
F. Signal harmonic content
• Zone interlocking
• User access to processed data (through PowerNet and
PowerPort)
• Meets ANSI, IEC, UL, CUL standards
Communication Features
• Local HMI
• Addressable
• Local Communication Port (RS-232 on 9-pin DIN)
• Remote communication ports
A. INCOM FSK
• Protocols
A. INCOM/IMPACC Communications Standard, IL 17384 -
Part A, version 3.0
B. MODBUS RTU
Self-Test Features
• Hardware
A. Processor integrity
B. RAM
C. PROM checksum
D. Analog input circuitry
• Application
A. Comparison of current flow with apparent state of
breaker
B. Comparison of apparent and set phase sequence
C. Determination of correct voltage or current phasor
relationships and/or balance
D. Setting integrity
Effective Date: 12/05
FP-5000
For more information visit:
Effective Date: 12/05
www.eatonelectrical.com
IL17569C
Page 1-5
Page 1-5