Eaton Cutler-Hammer FP 5000 Instruction Leaflet page 65

IL17569C
Page 5-10 Effective Date: 12/05
Freq Protection: Selects underfrequency (81U-1) and overfrequency (81O-1) device settings
Display Setting Description
81U-1 Underfreq Underfrequency Settings
Threshold: Select frequency threshold
Delay (c): Select delay time, which is based
on power system frequency
Overfrequency Settings
81O-1 Overfreq
Threshold: Select frequency threshold
Delay (c): Select delay time, which is based
on power system frequency
Power Protection: Select power protection and trip settings (32-1 & 32-2)
Display Setting Description
Power Protection Settings 1
32-1 Pwr
Definition
Direction: Select the direction of power
Criterion: Select if the threshold is based on
over or under power
32-1 Pwr Trip
Threshold: Select the magnitude of the power
required
Delay (c): Select delay time in cycles
Power Protection Settings 2
32-2 Pwr
Definition
Direction: Select the direction of power
Criterion: Select if the threshold is based on
over or under power
Power Trip Settings
32-2 Pwr Trip
Threshold: Select the magnitude of the power
required
Delay (c): Select delay time in cycles
* 1pu = 3 x CT secondary rating x VT secondary rating for wye; the square root of 3 x VT secondary rating x CT secondary
rating for delta
Page 5-10
FP-5000
Setpoint Range/
Value Selection
45 to 65, disable
(0.01 Hz increments)
0 to 9999
(1 cycle increments)
45 to 65, disable
(0.01 Hz increments)
0 to 9999
(1 cycle increments)
Setpoint Range/
Value Selection
Forward, Reverse, Both
Over, Under
0.02 to 4.00
0 to 65535 cycles
(1 cycle increments)
Forward, Reverse, Both
Over, Under
0.02 to 4.00
0 to 65535 cycles
(1 cycle increments)
For more information visit:
Default
Setting
Disable
60.00
Disable
60
Default
Setting
Reverse
Over
Disable
* or Disable
pu
10
Reverse
Over
Disable
* or Disable
pu
1
www.eatonelectrical.com
Selected Refer to
Value Sec. #
5.5.2.7
8.8
5.5.2.7
8.8
Selected Refer to
Value Sec. #
5.5.2.6
5.5.2.6
5.5.2.6
5.5.2.6
Effective Date: 12/05