Chapter 4 System Configuration; Applicable System - Mitsubishi Electric NZ2GF2S-60MD4 User Manual

4
SYSTEM CONFIGURATION
This chapter describes the configuration of the system using a multiple input module.
For CC-Link IE Field Network configuration, refer to the following manual.
 User's manual for the master/local module used
4.1

Applicable System

Applicable master station
When using an multiple input module, use the following products as a master station.
Model name
RJ71GF11-T2
RJ71EN71
RD77GF
QJ71GF11-T2
LJ71GF11-T2
QD77GF16
Information on "Applicable master station" described above is the ones at the point when this manual was issued.
For latest information, please visit the website of CC-Link Partner Association.
www.cc-link.org
Ethernet cable
For the specifications of the Ethernet cable, refer to the following manual.
 User's manual for the master/local module used
Applicable software package
Configuring and diagnosing the multiple input module requires GX Works2 or GX Works3. Install GX Works2 or GX Works3
with the following version in accordance with the master station used.
Engineering tool
GX Works2
GX Works3
When the latest profile of the multiple input module is necessary, please consult your local Mitsubishi
representative.
The profile is a setting file that stores information required for the start-up, operation, and maintenance of
devices supporting the CC-Link family. A module is added to "Module List" of the CC IE Field configuration
window by profile registration to GX Works2 or GX Works3. For registration of the profile, refer to the
following.
GX Works2 Version 1 Operating Manual (Common)
 GX Works3 Operating Manual
4 SYSTEM CONFIGURATION
28
4.1 Applicable System
First five digits of serial number
(No restriction)
"14102" or later
"14111" or later
Software version
Version 1.560J or later
Version 1.032J or later