Mitsubishi Electric NZ2GF2S-60MD4 User Manual page 59

8.
Set "Method selection" to "Parameter write".
9.
Set "Write Value". The procedures are as follows.
• Click the title cell of "Read Value" to select all the items and copy them.
• Click the title cell of "Write Value" to select all the items and paste the copy.
• Select the items to be changed, and set new values.
10.
Click the [Execute] button and the following window is displayed.
11.
Click the [Yes] button.
12.
The parameter is written to the multiple input module.
The module parameter setting of the slave station is completed.
6 VARIOUS SETTINGS
6.2 Changing the Parameter
6
57