Terms - Mitsubishi Electric NZ2GF2S-60MD4 User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
CC-Link IE Field Network
Cyclic transmission
Data link
Dedicated instruction
Digital output value
Disconnection
Engineering tool
Input range
Input type
Intelligent device station
Link device
Link special register (SW)
Link special relay (SB)
Local station
Master station
Master/local module
Multiple input
Multiple input module
REMFR
Remote buffer memory
Remote device station
Remote I/O station
Remote input (RX)
Remote output (RY)
Remote register (RWr)
Remote register (RWw)
REMTO
Reserved station
Simple motion module
Slave station
Transient transmission
Description
A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)
A function by which data is periodically exchanged among stations on the network using link devices
A generic term for cyclic transmission and transient transmission
An instruction that simplifies programming for using functions of intelligent function modules
A generic term for digital values and temperature measured values converted from analog signals which have been
input from the outside
A process of stopping data link if a data link error occurs
The another name for the software package for the MELSEC programmable controllers
A property that indicates the range of input value when the input type is set to the voltage, current, or micro voltage;
indicates the type of resistance temperature detector when the input type is set to the resistance temperature detector;
indicates the type of thermocouple when the input type is set to the thermocouple
A type of analog signals (voltage, current, and a sensor such as a thermocouple and a resistance temperature detector)
to be input to the multiple input module from the outside
A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by cyclic transmission. This
station can perform transient transmission as well. This station responds to a transient transmission (request) from other
stations and also issues a transient transmission (request) to other stations.
A device (RX, RY, RWr, or RWw) in a module on CC-Link IE Field Network
Word data that indicates the operating status and data link status of a module on CC-Link IE Field Network
Bit data that indicates the operating status and data link status of a module on CC-Link IE Field Network
A station that performs cyclic transmission and transient transmission with the master station and other local stations.
A station that controls the entire network. This station can perform cyclic transmission and transient transmission with all
stations. Only one master station can be used in a network.
The abbreviation for the CC-Link IE Field Network master/local module
A capability to input analog signals by different input types (voltage, current, micro voltage, thermocouple, or resistance
temperature detector) for one channel
The abbreviation for the NZ2GF2S-60MD4 CC-Link IE Field Network multiple input module
The abbreviation for ZP.REMFR
Buffer memory in a remote device station and intelligent device station
A station that exchanges I/O signals (bit data) and I/O data (word data) with another station by cyclic transmission. This
station responds to a transient transmission (request) from other stations.
A station that exchanges I/O signals (bit data) with the master station by cyclic transmission
Bit data input from a slave station to the master station (For some areas in a local station, data are input in the opposite
direction.)
 User's manual for the master/local module used
Bit data output from the master station to a slave station (For some areas in a local station, data are output in the
opposite direction.)
 User's manual for the master/local module used
Word data input from a slave station to the master station (For some areas in a local station, data are input in the
opposite direction.)
Word data output from the master station to a slave station (For some areas in a local station, data are output in the
opposite direction.)
The abbreviation for ZP.REMTO
A station actually not connected to the network. This station is counted as a connected station as a station reserved for
future use.
The abbreviation for the QD77GF16 and RD77G simple motion modules
A generic term for local station, remote I/O station, remote device station, and intelligent device station
A function of communication with other stations, which is used when requested by a dedicated instruction or an
engineering tool
11