Mitsubishi Electric NZ2GF2S-60MD4 User Manual page 24

Parameter area (address: 0000H to 01FFH)
For the parameter area, parameters can be set by means of the CC IE Field configuration of the engineering tool, or the
REMTO instruction.
The parameters in the parameter area are backed up to the non-volatile memory.
Parameters backed up to the non-volatile memory are read in the parameter area when the module power supply is turned off
and on or the module returns from remote reset.
For the parameters written from the parameter settings of the CC IE Field configuration of the engineering tool, the write to the
non-volatile memory is also completed at the same time.
When the parameter is written using the REMTO instruction, it is written to the non-volatile memory when Initial data setting
request flag (RY9) is turned on.
At this time, the parameter is written to the non-volatile memory even though it is incorrect.
When the power supply is turned off and on with an incorrect parameter written, the incorrect parameter is read from the non-
volatile memory and an error code is stored to Latest error code (RWr0). Take corrective action according to the error code
list. ( Page 95 List of Error Codes)
■Station-based parameter data
Address
Decimal Hexadecimal
0 to 255 0000H to
00FFH
■Module-based parameter data
R: Readable through a program, W: Writable through a program
Address
Decimal Hexadecimal
256 0100H
257 0101H
258 0102H
259 0103H
260 0104H
261 0105H
262 0106H
263 0107H
264 0108H
265 0109H
266 010AH
267 010BH
268 010CH
269 010DH
270 010EH
271 010FH
272 0110H
273 0111H
274 0112H
275 0113H
276 0114H
277 0115H
278 0116H
279 0117H
280 0118H
281 to 511 0119H to 01FFH
*1 This value is the value of factory default or the value of initialization by Parameter area initialization command (address: 1002H).
2 SPECIFICATIONS
22
2.6 List of Remote Buffer Memory Areas
Description
System area
Description
CH1 Input type/range setting
CH2 Input type/range setting
CH3 Input type/range setting
CH4 Input type/range setting
Averaging process setting
CH1 Time Average/Count Average/Moving Average
CH2 Time Average/Count Average/Moving Average
CH3 Time Average/Count Average/Moving Average
CH4 Time Average/Count Average/Moving Average
Input signal error/disconnection detection automatic clear enable/disable
setting
Input signal error detection setting
CH1 Input signal error detection setting value
CH2 Input signal error detection setting value
CH3 Input signal error detection setting value
CH4 Input signal error detection setting value
Conversion setting for disconnection detection
CH1 Conversion setting value for disconnection detection (L)
CH1 Conversion setting value for disconnection detection (H)
CH2 Conversion setting value for disconnection detection (L)
CH2 Conversion setting value for disconnection detection (H)
CH3 Conversion setting value for disconnection detection (L)
CH3 Conversion setting value for disconnection detection (H)
CH4 Conversion setting value for disconnection detection (L)
CH4 Conversion setting value for disconnection detection (H)
Cold junction temperature compensation setting
System area
*1
Default value Read/Write
0000H R/W
0000H R/W
0000H R/W
0000H R/W
0000H R/W
0 R/W
0 R/W
0 R/W
0 R/W
1 R/W
0000H R/W
50 R/W
50 R/W
50 R/W
50 R/W
1111H R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
0 R/W
 