Setting item
Disconnection detection function
Cold contact compensation function
6.
Click the [Execute] button and the following window is displayed.
7.
Click the [Yes] button.
8.
The parameter is written to the multiple input module.
• Set all the items for the parameter. If any blank exists, the parameter cannot be written to the multiple input
module.
• To read the parameter from the multiple input module, set "Method selection" to "Parameter read" and click
the [Execute] button.
• When the following message is displayed, take corrective action for the error code in < >.
For details on the error code, refer to the following.
Page 95 List of Error Codes
User's manual for the master/local module used
CH1 Conversion setting for disconnection
detection
CH1 Conversion setting value for disconnection
detection
CH2 Conversion setting for disconnection
detection
CH2 Conversion setting value for disconnection
detection
CH3 Conversion setting for disconnection
detection
CH3 Conversion setting value for disconnection
detection
CH4 Conversion setting for disconnection
detection
CH4 Conversion setting value for disconnection
detection
Cold contact compensation setting
Reference
Page 64 Disconnection Detection Function
Page 68 Cold Junction Temperature
Compensation Setting Function
6 VARIOUS SETTINGS
6.1 Parameter Setting
6
53