Panel - Epson WF-M21000 Series User Manual

Administrator Information
When you assign the printer's IP address by using the DHCP function of the DHCP server or router, it is
automatically set.
The proxy server is placed at the gateway between the network and the Internet, and it communicates to the
computer, printer, and Internet (opposite server) on behalf of each of them. The opposite server communicates
only to the proxy server. Therefore, printer information such as the IP address and port number cannot be read
and increased security is expected.
When you connect to the Internet via a proxy server, configure the proxy server on the printer.
Connecting to the Network from the Control Panel
Connect the printer to the network by using the printer's control panel.
Assigning the IP Address
Set up the basic items such as Host Address, Subnet Mask, and Default Gateway.
This section explains the procedure for setting a static IP address.
1. Turn on the printer.
2. Select Settings on the home screen on the printer's control panel.
3. Select General Settings > Network Settings > Advanced > TCP/IP.
4. Select Manual for Obtain IP Address.
When you set the IP address automatically by using the DHCP function of router, select Auto. In that case, the
IP Address, Subnet Mask, and Default Gateway on step 5 to 6 are also set automatically, so go to step 7.
5. Enter the IP address.
When entering an IP Address, enter zeroes (0) to make three digits as shown in the following example.
Example:
❏ If the IP address is 192.0.2.111, enter 192.000.002.111.
❏ If the IP address is 192.0.12.10, enter 192.000.012.010
Confirm the value reflected on the previous screen. After the IP address is entered, the zeroes you entered to
make three digiits are omitted.
6. Set up the Subnet Mask and Default Gateway.
Confirm the value reflected on the previous screen.
Important:
c
If the combination of the IP Address, Subnet Mask and Default Gateway is incorrect, Start Setup is inactive
and cannot proceed with the settings. Confirm that there is no error in the entry.
7. Enter the IP address for the primary DNS server.
Confirm the value reflected on the previous screen.
>
Connecting the Printer to the Network
479
>
Connecting to the Network from the
...