Replacing A Maintenance Box - Epson WF-M21000 Series User Manual

Solving Problems
❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and you may get
smeared with ink.
❏ Do not tilt the used maintenance box until after it is sealed in the plastic bag; otherwise ink may leak.
❏ Keep the maintenance box out of direct sunlight.
❏ Do not store the maintenance box in high or freezing temperatures.
❏ Do not reuse a maintenance box which has been removed and left detached for a long period. Ink inside the box
will have solidified and no more ink can be absorbed.
❏ Do not remove the maintenance box and its cover except when replacing the maintenance box; otherwise ink
may leak.

Replacing a Maintenance Box

In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how often this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
When a message is displayed prompting you to replace the maintenance box, refer to the animations displayed on
the control panel. The need for replacement of the box does not mean that your printer has ceased to operate in
accordance with its specifications. The Epson warranty does not cover the cost of this replacement. It is a user-
serviceable part.
Note:
When the maintenance box is full, you cannot print and clean the print head until it is replaced to avoid ink leakage.
However, you can perform operations that do not use ink such as scanning.
Related Information
"Maintenance Box Code" on page 401
&
"Maintenance Box Handling Precautions" on page 287
&
>
It is Time to Replace the Maintenance Box
>
Replacing a Maintenance Box
288