Table of Contents
Advertisement
Product Information
"Entering Characters" on page 31
&
Printer Settings
Select the menus on the control panel as described below.
Settings > General Settings > Printer Settings
You cannot change settings that have been locked by your administrator.
Paper Source Settings:
Paper Setting:
Select the paper source to specify the paper size and paper type you loaded. When Paper Size
Auto Detect is enabled, the printer detects the paper size you loaded.
Paper Tray Priority:
Select On to give printing priority to paper loaded in the paper tray.
A4/Letter Auto Switching:
Select On to feed paper from the paper source set as A4 size when there is no paper source set
as Letter, or feed from the paper source set as Letter size when there is no paper source set as
A4.
Auto Select Settings:
When paper runs out, paper is automatically fed from a paper source that has the same
settings as the paper settings for the print jobs. You can set automatic selection for every paper
source for each function in copy, fax, or other. You cannot set everything to off.
This setting is disabled when you select a specific paper source in the paper settings for the
print jobs. Depending on the paper type setting on the Main tab of the printer driver, paper
may not be fed automatically.
Error Tone:
Select On to display an error message with an error sound when the selected paper size or type
does not match the loaded paper.
Paper Setup Auto Display:
Select On to display the Paper Setting screen when loading paper in the paper source.
User-Defined Paper Size List:
You can change the user defined size setting. This is useful when you print frequently on
irregularly sized paper.
Output: Copy:
Select where to output when copying.
Output: Fax:
Select where to output when receiving a fax.
>
>
Settings Menu List
General Settings
416
Advertisement
Table of Contents
