Solving Problems When Using An Additional Network - Epson WF-M21000 Series User Manual

Using Optional Items
3. Set the subject of email notification.
Select the contents displayed on the subject from the two pull-down menus.
❏ The selected contents are displayed next to Subject.
❏ The same contents cannot be set on left and right.
❏ When the number of characters in Location exceeds 32 bytes, characters exceeding 32 bytes are omitted.
4. Enter the email address for sending the notification email.
Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ? ^ _ { | } ~ @, and enter between 1 and 255 characters.
5. Select Standard or Additional for the network used to send to recipients.
6. Select the language for the email notifications.
7. Select the check box on the event for which you want to receive a notification.
The number of Notification Settings is linked to the destination number of Email Address Settings.
Example :
If you want a notification sent to the email address set for number 1 in Email Address Settings when the
printer is out of paper, select the check box column 1 in line Paper out.
8. Click OK.
Confirm that an email notification will be sent by causing an event.
Example : Print by specifying the Paper Source where paper is not set.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 410
&
"Configuring a Mail Server" on page 489
&
"Items for Email Notification" on page 559
&

Solving Problems when Using an Additional Network

Cannot Print or Scan from a Computer
The standard or additional network settings are incorrect.
You need to set up the standard network and the additional network. Check the settings for both networks.
Related Information
"Connecting to the Network from the Control Panel (When Using an Additional Network)" on page 388
&
>
Ethernet Board (10/100/1000 Base-T, Ethernet)
392
>
Solving Problems when Using an Addi
...