Scanning Using Wsd; Setting Up A Wsd Port - Epson WF-M21000 Series User Manual

Scanning
>

Scanning Using WSD

❏ Erasing Position:
Select the position to remove the punch holes.
❏ Orientation (Original):
Select the orientation of the original.
ADF Continuous Scan:
You can place a large number of originals in the ADF in batches, and scan them as a single scanning
job.
File Name:
Set the file name.
File Password:
Set the password to select the file.
User Name:
Set the user name for the file.

Scanning Using WSD

Note:
❏ This feature is only available for computers running Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista.
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
"Setting Up a WSD Port" on page 133
1. Place the originals.
"Placing Originals" on page 41
2. Select Scan > WSD on the control panel.
3. Select a computer.
4. Tap
x
.

Setting Up a WSD Port

This section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
The following is necessary to set up a WSD port.
❏ The printer and the computer are connected to the network.
❏ The printer driver is installed on the computer.
1. Turn the printer on.
>
Setting Up a WSD Port
133