Powtran PI9100 Series Manual page 240

Appendix II How to use universal encoder expansion card
(applicable for all series of Powtran frequency inverters)
II-1 Overview
PI9000 is equipped with a variety of universal encoder expansion card (PG
card), as an optional accessory, it is necessary part for the inverter closed -loop
vector control, please select PG card according to the fo rm of encoder output, the
specific models are as follows:
Options
PI9000_PG1
PI9000_PG3
PI9000_PG4
PI9000_PG5
II-2 Description of mechanical installation and control terminals
function
The expansion card specifications and terminal signals for each encoder are
defined as follows:
Table 1 Definitions of specifications and terminal signals
Differential PG card(PI9000_PG1)
PI9000_PG1 specifications
User
interface
Spacing
Screw
Swappable
Wire gauge
Description
ABZ incremental encoder.
Differential input PG card, without
frequency dividing output.
OC input PG
frequency dividing output.
5V，12V，24V voltage is optional,
please provide voltage and pulse
input mode information
ordering.
UVW incremental encoder.
UVW Differential input PG card,
without frequency dividing output.
5V voltage
Rotational transformer PG card
ABZ incremental encoder.
OC input PG card, with 1:1
frequency dividing output.
5V，12V，24V voltage is optional,
please provide voltage and pulse
input mode information
ordering.
Terminal block
3.5mm
Slotted
NO
16-26AWG
card, without
when
when
235
Appendix II
Others
Terminal wiring
Terminal wiring
Terminal wiring
Terminal wiring