N5439A Infiniimax Iii Zif Probe Head - Keysight InfiniiMax III N2800A Series User Manual

N5439A InfiniiMax III ZIF Probe Head

The N5439A Zero Insertion Force (ZIF) probe head
provides 28 GHz bandwidth. The head supports three
types of economical replaceable tips which are shown in
Table
Because of the ZIF tip's extremely low loading, the tips
can remain on the DUT as you easily move the probe
head from one probing site to the next.
For information on mechanically securing the probes to
protect your equipment and designs from damage, refer to
Heads"
Table 4 Available ZIF Tips
ZIF Tip Description
N2838A 25 GHz 450W PC board tip provides robust design with
high bandwidth.
N5440A 28 GHz 450W ceramic
(normal sensitivity) for
extremely low probe
loading.
N5447A 28 GHz 200W ceramic
high-sensitivity for
extremely low probe
loading.
The N5439A does not include any ZIF tips. You must order either the N2838A, N5440A, or
N OT E
N5447A in addition to N5439A.
N OT E
For performance plots, refer to
N OT E
InfiniiMax III Series Probes User's Guide
4. Solder as many tips onto your DUT as needed.
on page 53.
To install or repair the N2838A resistor leads, refer to
Tips" on page 56.
Chapter
"Strain Relieving the Probe
Variable Tip Spacing
5 mil to 250 mil
(0.127 mm to 6.35 mm).
5 mil to 80 mil
(0.127 mm to 2 mm).
5 mil to 80 mil
(0.127 mm to 2 mm).
"Replacing Axial Resistor
7, "Performance Plots.
InfiniiMax III Probe Heads
Qty
5
5
5
2
33