Compatible Oscilloscopes - Keysight InfiniiMax III N2800A Series User Manual

Compatible Oscilloscopes

The N2800A-series probe's AutoProbe II interface connects directly to series
90000 Q, V, X, Z-series, and UXR-series (13 - 33 GHz) Infiniium oscilloscopes.
• Use an N5477A adapter to connect to the 86100D oscilloscope.
• Use an N2852A AutoProbe II to AutoProbe III interface adapter to connect to
Table 1
Oscilloscope
90000 Q, V, X, Z-Series
86100C/D Series
UXR-Series (13-33 GHz)
UXR-Series (40 GHz or higher)
Is your oscilloscope software up-to-date?
Keysight periodically releases software updates to support your probe, fix known
defects, and incorporate product enhancements. To download the latest firmware,
go to www.Keysight.com and search for your oscilloscope's model number. Click
on the "Drivers, Firmware & Software" tab under the Technical Support link.
InfiniiMax III Series Probes User's Guide
the UXR-series (40 - 110 GHz) Infiniium oscilloscope.
N2800A-Series Probes and Compatible Oscilloscopes
Using InfiniiMax III Series Probes
Adapter Required
none
N5477A
none
N2852A
Minimum Required Firmware
Version
5.50
—
10.0
10.10
1
9