Table of Contents
Advertisement
◆ Display Interface
After starting up the display, default show is running speed and Total Distance . Press
MODE to change the indicated information in sequence as below: Running Speed (Km/h)
→ Trip Distance (km) → Total Distance (km) → Travel Time(Hour.) →Max Speed (Km/h)
→ Average Speed (Km/h) → Motor Power(W) →Running Speed (Km/h).
◆ Push Cruise Control
Hold DOWN for 2 seconds to enter the mode of power assistant walk. The e-bike will
go on at a uniform speed of 6 Km/h when you hold DOWN always. P shows on the screen
at the same time. Otherwise immediately stop 6 km/h output power when the DOWN is
released and interface returns to the mode before the power assistant walk.
■
"Push Cruise Control" function can only be used to push the e-bike by hands.
Please don't use this function when riding.
◆ Turn on/off Backlight
Hold UP for 2 seconds to turn on the backlight of the display, the headlight will be
power on at the same time. Hold UP for 2 seconds again, backlight will be turned off.
Push Cruise control
3
- Quick Links:
- Trip Distance Clearance
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming with the power button.
This answer is automatically generated