Table of Contents
Advertisement
confirm and enter settings mode of PAS sensitivity, the default direction is"run-F".
The Sensitivity of PAS Settings
SCN means the sensitivity of PAS settings. The sensitivity value is 2 to 9. 2 is the
strongest, 9 is the weakest. Press UP or DOWN to select sensitivity value, and press
MODE to confirm selection and enter magnet disk settings mode.The sensitivity of PAS
default value is 2.
Magnet quantity Settings
N means magnet numbers of PAS disk. Press UP or DOWN to select quantity
corresponding to PAS disk. Magnet quantity default value is 6.
◆ Speed Sensor Selection
SPS means speed sensor settings. Press UP or DOWN to select the quantity of
magnet head (the range is from 1 to 9), and hold MODE to confirm and return to previous
menu. SPS default value is 1.
Direction of PAS Sensor Settings
The Sensitivity of PAS Settings
PAS Magnet Disk Settings
9
- Quick Links:
- Trip Distance Clearance
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming with the power button.
This answer is automatically generated