Power-on Password Modify
When the display shows P3, 0000, press MODE to choose digit one by one, press UP
or DOWN to input the new password, then hold MODE to confirm the modification and exit
settings. Restarting display will show P1,0000, input the new password to power on.
◆ Exit settings
In the settings state, pressing MODE (less than 2s) is to confirm the input. Holding
MODE (more than 2s) is to save the settings, and then exit the current settings. Holding
DOWN (more than 2s) is to cancel the operating but not saving settings data, and then
return to previous menu.
■
If there is not any operations in one minute, display will exit the settings state.
Recover default settings
dEF means recover default settings. Press both UP and MODE more than 2 seconds to
enter recover default settings. Press UP or DOWN to choose Y or N. N means that do not
recover default settings. Y means that recovers default settings. When it is Y, hold MODE to
recover default settings, the display shows DEF-00 at the same time, and then return to
general display state. The default state is N.
Power-on Password Disable
Power-on Password Modify
Recover Default Settings Interface
13
Interface
Interface