Table of Contents
Advertisement
Max speed limited
MAX SPD means max speed limited settings. Press UP or DOWN to Set the max
speed from 25Km/h~40 Km/h. Press MODE to confirm and enter Button PAS Settings. The
default is 40Km/h.
■
This settings is the priority version. The speed is the maximum setted by
manufacturer.
Button PAS Settings
PUS means button push settings. Press UP or DOWN to choose Y or N. Y means
button push is enabled, N means button push is disabled. Press MODE to confirm and
enter PAS speed settings.The default value is Y.
PAS Speed Settings
Adjust push speed by settings PAS to meet rider's requirements. Press UP or DOWN
to adjust from 20% to 35%, press MODE to confirm and enter slowly start up. Default value
is 25%.
Delay time of battery power interface
Interface of max speed limited settings
Interface of PAS push
11
- Quick Links:
- Trip Distance Clearance
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KD21C and is the answer not in the manual?
Questions and answers
How to reset total miles on display
The total miles (odometer) on the Key-Disp KD21C display cannot be reset. Only the trip counter can be reset by pressing and holding the plus (+) and minus (-) buttons, then selecting "Y" for yes, and confirming with the power button.
This answer is automatically generated