Remote Setting - Epever SolarV TRIRON Series User Manual

5.1.3 Remote Setting

1 Setting the battery parameters by PC software
Connect the controller's RJ45 port to the PC's USB port via a USB to RS485 cable. When selecting
the battery type as "USE," set the voltage parameters by the PC software.
2 Setting the battery parameters by APP
Via an external WiFi module
Connect the controller to an external WIFI module through a standard network cable. End-users
can set the voltage parameters by the APP after selecting the battery type as "USE." Refer to the
cloud APP manual for details.
Via an external Bluetooth module
Connect the controller to an external Bluetooth module through a standard network cable.
End-users can set the voltage parameters by the APP after selecting the battery type as "USE."
Refer to the cloud APP manual for details.
3 Setting the battery parameters by MT50
Copyright© 2022 SolarV GmbH All rights reserved.
34