Setting - Epever Tracer-AN Series User Manual

3） Error codes
Status
Battery over
discharged
Battery over
voltage
Battery over
heating
Controller
over
temperature
System
voltage error

3.4 Setting

1) Clear the generated energy
In the PV power interface, long-press the "ENTER" button until the value flashes. Then it
enters the reset mode; press the "ENTER" button again to confirm and reset.
2) Switch the battery temperature unit
In the battery temperature interface, long-press the "ENTER" button to switch the unit.
3) Battery type
① Support battery types
Lead-acid battery
Lithium battery
Faults Charging
Indicator indicator
Red ON
--
solid
Red
Slow --
flashing
Red
slowly --
flashing
Red Green
slowly slowly
flashing flashing
Red Fast
slowly flashing in
flashing green
Symbol
Sealed(default)
Gel
Flooded
User
LiFePO4(4S/12V;8S/24V;16S/48V)
Li(NiCoMn)O2 (3S/12V;6S/24V;12S/48V)
User
23
Instruction
Battery level shows empty,
battery frame blink, fault
icon blink.
Battery level shows full,
battery frame blink, fault
icon blink.
Battery level shows current
value, battery frame blink,
fault icon blink.
Battery level shows current
value, battery frame blink,
fault icon blink.
Battery level shows current
value, battery frame blink,
fault icon blink.