Epever SolarV TRIRON Series User Manual page 15

Installation Procedure:
Figure2-1 Mounting
Step 1: Determination of the installation location and heat-dissipation Space
Figure 2-2 Schematic of wiring diagram
The controller shall be installed in a place with sufficient airflow through the controller radiators and
a minimum clearance of 150 mm from the upper and lower edges of the controller to ensure natural
thermal convection. Please see Figure 2-1: Mounting.
Suppose the controller is to be installed in an enclosed box. In that case,
11
Copyright© 2022 SolarV GmbH All rights reserved.