User-friendly buttons for comfortable and convenient operation
Master and slave RS485 communication modules design, reading the load or inverter
operating data
Control the inverter switch through the relay interface
Provide 5VDC power through the dual USB output interface to charge electronic devices
For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the
battery type is "USE."
1.2 Characteristics
Mounting Hole
Display Module
Interface Module
RTS Interface
If the temperature sensor is short-circuited or damaged, the controller will charge
or discharge at the default temperature setting of 25 ºC.
Copyright© 2022 SolarV GmbH All rights reserved.
Figure 1 Product Characteristics
2
PV Terminals
Battery Terminals
Load Terminals